diary/Kojima/2005-12-26
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[diary/Kojima]]
・kernel 2.6 と SANE
昨日の画像は Plamo-4.2 な環境で sane と xscaneimage で取...
確か 2.4 カーネルでは scanner.o というカーネルモジュール...
仕方ないので、libusb-0.10a をビルド&インストールしてからs...
kojima@XEON[/mnt/Srcs/sane-frontends-1.0.14]% sane-find-...
# sane-find-scanner will now attempt to detect your sc...
# result is different from what you expected, first ma...
# scanner is powered up and properly connected to your...
# No SCSI scanners found. If you expected something di...
# you have loaded a kernel SCSI driver for your SCSI a...
found USB scanner (vendor=0x04b8 [EPSON], product=0x011e...
# Your USB scanner was (probably) detected. It may or ...
# SANE. Try scanimage -L and read the backend's manpage.
sane-frontends-1.0.14 をビルド&インストールしたら、何とか...
しかし、このヘン、Linux は過去との互換性とかを遠慮なく切...
新たな開発版もまだしばらくは出てきそうにないので、2.6 カ...
#comment
終了行:
[[diary/Kojima]]
・kernel 2.6 と SANE
昨日の画像は Plamo-4.2 な環境で sane と xscaneimage で取...
確か 2.4 カーネルでは scanner.o というカーネルモジュール...
仕方ないので、libusb-0.10a をビルド&インストールしてからs...
kojima@XEON[/mnt/Srcs/sane-frontends-1.0.14]% sane-find-...
# sane-find-scanner will now attempt to detect your sc...
# result is different from what you expected, first ma...
# scanner is powered up and properly connected to your...
# No SCSI scanners found. If you expected something di...
# you have loaded a kernel SCSI driver for your SCSI a...
found USB scanner (vendor=0x04b8 [EPSON], product=0x011e...
# Your USB scanner was (probably) detected. It may or ...
# SANE. Try scanimage -L and read the backend's manpage.
sane-frontends-1.0.14 をビルド&インストールしたら、何とか...
しかし、このヘン、Linux は過去との互換性とかを遠慮なく切...
新たな開発版もまだしばらくは出てきそうにないので、2.6 カ...
#comment
ページ名: